EasyGreen FAQ Logo

Automatic Sprouter and Wheatgrass Grower

Browse Ask a Question EasyGreen Shop Home
 
Tools Add
Rss Categories

How do I activate or deactivate the timer on my EasyGreen Automatic Sprouter?

Author: Nory Oakes Reference Number: AA-00208 Views: 1683 Created: 09/16/2011 10:16 Last Updated: 10/21/2011 10:25 0 Rating/ Voters

Answer                        

If the small red light below and to the right of the dial on the front of the timer is lit and the button is locked on «I» position, it means that the timer is deactivated and power will be supplied 24 hours a day.

Your EasyGreen® sprouter will mist your sprouts constantly until all water in the waster compartment is used. If the button on the front of the timer is on the «watch» position, then the timer is activated, and the power will be supplied to your sprouter only during the periods you choose. At these periods, the light on the switch at the right side of your timer will turn red.

** If you are consuming more then a full water tank a day, check your timer settings. You should not have more then 7 SINGLE toggles pressed (activated) along the circumference of the dial.  

For more information, see Mist Generator and Timer - Fine Tuning: How do I set up my timer?


 

Rss Comments
  • There are no comments for this article.
Info Add Comment
Nickname: Your Email: Subject: Comment:
Info Ask a Question